technical data sheet tnc 50 ? bulkhead jack 56K611-272N5 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 fax : +49 8684 18-499 email : info@rosenberger.de page 1 / 2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/08.13/6.1 all dimensions are in mm; tolerances according to iso 2768 m-h interface according to iec 60169-17, mil-prf-39012, din en 122200 documents assembly instruction 51 s2 panel piercing b 3 material and plating connector parts material plating center contact spring bronze aurodur?, gold plated outer contact brass flash white bronze over silver(e.g. optargen?) body brass flash white bronze over silver(e.g. optargen?) dielectric ptfe gasket silicone
technical data sheet tnc 50 ? bulkhead jack 56K611-272N5 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 fax : +49 8684 18-499 email : info@rosenberger.de page 2 / 2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg rf_35/08.13/6.1 electrical data impedance 50 ? frequency dc to 10 ghz return loss ? 34 db, dc to 2 ghz ? 25 db, 2 to 4 ghz ? 20 db, 4 to 10 ghz insertion loss ? 0.05 db insulation resistance ? 5 g ? center contact resistance ? 1.5 m ? outer contact resistance ? 1 m ? test voltage 1500 v rms working voltage 500 v rms power handling (at 20 c, sea level, vswr 1.0) ? 80 w @ 2 ghz - limitations are possible due to the used cable type ? mechanical data mating cycles min. 500 center contact captivation: axial ? 15 n coupling test torque max. 1.7 nm recommended torque 0.46 nm to 0.69 nm environmental data temperature range -45 c to +85 c thermal shock mil-std-202, method 107, condition b corrosion mil-std-202, method 101, condition b vibration mil-std-202, method 204, condition b shock mil-std-202, method 213, condition g moisture resistance mil-std-202, method 106 rohs compliant tooling n/a suitable cables rg 402 /u, ut 141-sa-m17 weight weight 16.7 g /pce draft date approved date rev. engineering change number name date inge mhlauer 10.08.04 sa. krautenbacher 20.03.14 f00 14-0352 t. krojer 20.03.14 while the information has been carefully compiled to the best of our knowledge, nothing is int ended as representation or warran ty on our part and no statement herein shall be c onstrued as recommendation to infringe existi ng patents. in the effort to improve ou r products, we reserve the right to make changes judged to be necessary.
|